
Threaded Cartridge Pump Standard Specifications
Cartridge Material: Standard: Anodized Aluminum, Buna-N O-rings
Optional Materials: Stainless Steel, PVC, Peek, Teflon®, Delrin®
O-rings available in additional materials - Consult factory for availability
Medium: Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature: -30° to ~250°F [-34° to ~121°C]
Operating Pressure: 80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures
Mid Series Threaded Cartridges Operating and Installation Requirements
Cartridge Size: C60 (M, H)-TH and C90 (L, M, H)-THC100 (L, M, H)-TH and C150 (L, M, H)-TH
Supply Line:1/4” O.D. [6mm] tube3/8” O.D. [10mm] tube
Vacuum Line:1/4” O.D. [6mm] tube3/8” O.D. [10mm] tube
Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF125LPM (see In-Line Filter Page)
Max Series Threaded Cartridges Operating and Installation Requirements
Cartridge Size: C200 (L, M, H)-THC250 (L, M, H)-TH
Supply Line:3/8” O.D. [10mm] tube3/8” O.D. [10mm] tube
Vacuum Line:3/8” O.D. [10mm] tube3/8” O.D. [10mm] tube
Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF375LPM (see In-Line Filter Page)
Max Series Threaded Cartridges Operating and Installation Requirements
Cartridge Size: C300 (L, M, H)-THC350 (L, M, H)-TH
Supply Line:1/2” O.D. [12mm] tube1/2” O.D. [12mm] tube
Vacuum Line:1/2” O.D. [12mm] tube1/2” O.D. [12mm] tube
Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF500LPM (see In-Line Filter Page)