Products

Single Stage Replacement for Multi-Stage Vacuum Pumps

The C-MSR Series cartridges and pumps offer a high performance, low maintenance replacement for clogged multi-stage cartridges. Bimba's single stage venturi cartridges feature a straight-through design that allows dirt, dust and debris to pass through the cartridge without clogging. These cartridges thread directly into existing multi-stage pumps and vacuum grippers and can be replaced in minutes ensuring continuous, uninterrupted productivity.

  • 23 different performance optimization levels available to accommodate various applications
  • Non-clogging design means cartridges never lose suction or require costly filters or vacuum cup screens
  • Cartridges come standard with silencers
  • Drop in replacement for leading multistage cartridges
  • High productivity with vacuum levels up to 28" Hg [948 mbar] to hold parts tight

How to Order

 

 

 

 

Operation

Threaded Cartridge Pump Standard Specifications

Cartridge Material:Standard: Anodized Aluminum, Buna-N O-rings
Optional Materials:Stainless Steel, PVC, Peek, Teflon®, Delrin®
O-rings available in additional materials - Consult factory for availability
Medium:Filtered (50 micron) un-lubricated, non-corrosive dry gases
Operating Temperature:-30° to ~250°F [-34° to ~121°C]
Operating Pressure:80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures

 
Performance Level Designations:

 “L”0-10”Hg, [0 to 339mbar] for low vacuum/high flow applications (not available for Min Series)

M”0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications

H”0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications

 
Mid Series Threaded Cartridges Operating and Installation Requirements

Cartridge Size: C60 (M, H)-TH and C90 (L, M, H)-THC100 (L, M, H)-TH and C150 (L, M, H)-TH

Supply Line:1/4” O.D. [6mm] tube3/8” O.D. [10mm] tube

Vacuum Line:1/4” O.D. [6mm] tube3/8” O.D. [10mm] tube

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF125LPM (see In-Line Filter Page)


Max Series Threaded Cartridges Operating and Installation Requirements

Cartridge Size: C200 (L, M, H)-THC250 (L, M, H)-TH

Supply Line:3/8” O.D. [10mm] tube3/8” O.D. [10mm] tube

Vacuum Line:3/8” O.D. [10mm] tube3/8” O.D. [10mm] tube

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF375LPM (see In-Line Filter Page)

 
Max Series Threaded Cartridges Operating and Installation Requirements

Cartridge Size: C300 (L, M, H)-THC350 (L, M, H)-TH

Supply Line:1/2” O.D. [12mm] tube1/2” O.D. [12mm] tube

Vacuum Line:1/2” O.D. [12mm] tube1/2” O.D. [12mm] tube

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF500LPM (see In-Line Filter Page)