Sensors (IntelliSense® sensors for condition based monitoring -- be proactive about maintenance.)
24V Class 2 Power supply for use with IntelliSense® Sensor Interface Module.
Enhances your IntelliSense® network with remote monitoring and data logging capabilities.
This is a service part for the IntelliSense® Data Gateway.
Female DB9 to RJ45 CAT5 Serial Cable to connect IntelliSense® SIM to RS422 to USB Serial Hub.
IntelliSense® Fittings are an easy way to connect an IntelliSense® Sensor to a pneumatic actuator.
0.5M for wire cable Molex 4-Pin Header to flying lead.
Has four RJ45 connectors and one 8 pin terminal block in parallel to simplify IntelliSense® wiring.
Kit contains IntelliSense® Sensor Interface Module, fittings and sensors for an IntelliSense® network.
Compact pressure and temperature sensor for using with and IntelliSense® Sensor Interface Module.
Female 4 pin Micro M8 Straight connector to 4 pin Female Micro M8 90° connector shielded cable.
The intelligence behind IntelliSense®.
IntelliSense® USB programming cable required for the initial setup of an IntelliSense® SIM.
4 Port Serial RS422 to USB Hub with Din Rail Bracket.
Switches and Position Control (We offer a wide variety of switches for position sensing applications.)
Available in sinking, sourcing, or reed model type and compatible with Mead Centaur cylinders.
MRS switches feature a heavy duty band mount in a variety of models and operating voltages.
This mounting band is available for use with High Illumination band mounted switches.
These switches feature a larger LED lit area that can be seen further away than other switches.
Recommended for low current DC loads and can be used on cylinders with up to a 3" bore.
Available as sourcing, sinking, or reed, and can be used with Mead DM1 and HD1 tie-rod cylinders.
Switch brackets are available for mounting TRD switches to the actuators.
High illumination switches offer a larger LED lit area that can be seen further away than other switches.