TRD's 2-stage telescoping cylinders feature standard NFPA aluminum body construction, with a solid aluminum piston with bumper piston seals and a PTFE wear band.  The wear bands provide additional bearing support on the tube.  These cylinders are designed to support the unit's weight only, and are not intended for "side load" applications.

  • Bore sizes:  3/4", 1-1/2”, and 2-1/2” effective bores
  • Strokes up to 60 inches
  • Space savings design
  • Rated for non-lube service
  • Standard NFPA mounting
  • Internal bumpers at each stage


Mounting Accessories
NFPA Tie Rod Stainless Steel Clevis Bracket
NFPA Tie-Rod Stainless Steel Eye Bracket
NFPA Tie Rod Stainless Steel Clevis Pin (w/cotter pin)
Rod End and Port Attachments
Alignment Coupler (#5-40 to 1"-14)
Jam Nut (#5-40 to 1"-14)
NFPA Tie Rod Stainless Steel Rod Clevis
NFPA Tie Rod Stainless Steel Rod Eye
Tie Rod Mounted Switches
High Illumination [for TRD Cylinders](MSS/R10)
High Illumination Switch Bracket (SB15/SB32)
How to Order Content

Telescoping How to Order



Additional Specs Content

Pressure Rating:  125 PSI Air
Temperature Range:
Std. (Carboxilated Nitrile) seals:  -20° F (29° C) to 200° F (90° C)
Rod:  Chrome plated high strength carbon steel
Rod Bushing:  Teflon coated cast iron
Head/Cap:  Black anodized 6061-T6 aluminum
Tube:  Clear hard coat anodized 6063-T6 aluminum
Tie Rods:  Black oxide finish 100,000 PSI yield pre-stressed steel
Piston:  6061-T6 aluminum with PTFE wear band