Products

Mid Series Segmented Vacuum Manifolds - VMBV

Vaccon

The VMBV Mid Series Segmented Vacuum Manifolds are individual vacuum pump segments with a common air supply that provides independent vacuum to multiple locations. Segments can be individually configured or they can all be the same. All segments offer integral NC solenoid control for vacuum creation. For added functionality, specify a valve for blow-off and a vacuum switch/sensor for part present/vacuum achieved feedback.

  • Precise control – control both the vacuum and the blow-off duration time
  • Fast response – no delay due to long plumbing lines; installs close to vacuum point
  • Instantaneous vacuum as needed – minimal air consumption
  • High productivity – cycle rates up to 2700/min
  • Reliable – operates trouble-free: no moving parts to wear or clog
  • No maintenance, no downtime

 

To order the VMBV Series Venturi Pump or to obtain CAD files, please contact Bimba | Vaccon Technical Support @ 508-359-7200 or vaccon-engineering@bimba.com

How to Order Content

For assistance configuring a VMBV Mid-Series Modular Segmented Vacuum Manifold contact the Bimba | Vaccon Technical Support Team at 508-359-7200 or click here to email the team.

 

 

 

 

Additional Specs Content

 

VMBV Manifold Segment Standard Specifications

Body Material: Anodized Aluminum, Buna-N, Brass, Acetal (for silencer material see Silencer Page)

Cartridge Material: Nylon, Buna O-Ring
O-rings available in additional materials - Consult factory for availability

Medium: Filtered (50 micron) un-lubricated, non-corrosive dry gases

Operating Temperature:-23° to ~122°F [-5° to ~50°C]

Operating Pressure:80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures

 
Performance Level Designations:

L”0-10”Hg, [0 to 677mbar] for low vacuum/high flow applications

M”0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications

H”0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications

 

2-Way Pilot Valve Specifications 

Valve Type:          Axial 2-Way Solenoid Valve, Normally closed

Valve Body Material: Brass, Aluminum, Buna-N

Valve Operating Pressure: Vacuum to 120 PSI [-1 to 8 bar]

Electrical:24 VDC [-15% to +10% Nominal]

Power Consumption:4 watts

Response Time:6 milliseconds

Cycle Rate:80 cycles/second

Average Life:100 million cycles

Electrical Connection:Fixed leads, 24 AWG, 18” [457.2mm], optional M8 3-pin connector

LED Indicator: Yes

Manual Override: Yes, non-locking, spring return

M8 3-pin Connection: Yes, optional

 
VMBV Mid Series Operating and Installation Requirements

Cartridge Size:  C60 (M, H) and C90 (L, M, H)                C100 (L, M, H) and C150 (L, M, H)

Supply Line:      1/4” O.D. [6mm] tube                              3/8” O.D. [10mm] tube

Vacuum Line:     3/8” O.D. [6mm] tube                              3/8” O.D. [10mm] tube

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Vaccon recommends model VF250F
(see In-Line Filter Page)

Mounting Screws: Mounting holes accept 10-32 [M5] screws