Products

Max Series Venturi Vacuum Pump - VP80/VP80BV-200/250

Vaccon

The VP80 Max Series air-powered venturi vacuum pumps provide high vacuum flow rates for the rapid evacuation of large volumes of air or for overcoming leakage in order to sustain high vacuum levels while handling porous materials. The VP80’s are also dirt tolerant, include a straight-through silencer for quiet operation and offer an optional integrated solenoid valve for vacuum control and increased production cycles.

  • High performance – powerful vacuum up to 28”Hg [948mbar]
  • Compact & lightweight, rugged body construction
  • Fast response – mounts close to vacuum point
  • Efficient – minimal air consumption
  • Safe operation: no electricity needed at the pump
  • Reliable – operates trouble-free: straight-through design, non-clogging

To order the VP80 Series Venturi Pumps or to download CAD files, click here for VP80-200 Series or here for VP80-250 Series.

How to Order Content

The model number for the VP80 Series Venturi Vacuum Pumps consists of the base model acronym* (VP80, VP80BV or VP80BVM8) plus three alphanumeric clusters. These clusters designate the vacuum level, operating pressure, and silencer. Refer to the chart below for an example of model number VP80-200H-ST6A This is a VP80-200 pump (maximum vacuum flow of 200) with a maximum vacuum level of 28"Hg [948mbar], operating pressure of 80 PSI, and ST6A silencer. Note, part numbers beginning with I- denote a model with G port metric threads.

Base model options:

VP80 indicates the base model
VP80BV includes an optional integrated solenoid valve with flying leads (N/A in VP80-250H)
VP80BVM8 includes the optional integrated valve with M8 connector (N/A in VP80-250H)

 

VP80-200 Series

How-to-order

 

VP80-250 Series

VP80

 

 

 

Additional Specs Content

VP80

 

VP80-200-250 / VP80BV-200-250 Pump Standard Specifications

Pump Material: Anodized Aluminum (for silencer material see Silencer Page)

Medium: Filtered (100 micron) un-lubricated, non-corrosive dry gases

Operating Temperature:-100° to ~400°F [-73° to ~204°C]

Operating Pressure:80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures

 
Performance Level Designations:

L”0-10”Hg, [0 to 677mbar] for low vacuum/high flow applications

M”0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications

H”0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications

 
VP80BV-200-250 Optional 2-Way Valve Specifications

Valve Type: Axial 2-Way Solenoid Valve, Normally closed

Valve Body Material: Brass, Aluminum, Buna-N

Valve Operating Pressure: Vacuum to 120 PSI [-1 to 8 bar]

Electrical:24 VDC [-15% to +10% Nominal]

Power Consumption:4 watts

Response Time:6 milliseconds

Cycle Rate:80 cycles/second

Average Life:100 million cycles

Electrical Connection:Fixed leads, 24 AWG, 18” [457.2mm], optional M8 3-pin connector

LED Indicator: Yes

M8 3-pin Connection: Yes, optional

  

VP80-200-250 / VP80BV-200-250 Max Series Operating and Installation Requirements

Supply Line:3/8” O.D. [10mm] tube recommended

Vacuum Line:3/8” O.D. [10mm] tube recommended

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Vaccon recommends model VF375F (see In-Line Filter Page)

Mounting: Mounting holes accept 10-32 or M5 screws