Double Acting Collet Fixtures


Mead's collet fixtures evenly and firmly grip all round bar stock during drilling, machining, positioning, or assembling tasks.  This is done with no marring of the surface of the bar.  The workpiece passes through the collet fixture.  The collets accept 3C & 5C collets.  A collet wrench is supply with each collet fixture. 

  • Works with all round bar stock
  • Applied holding pressure:  3,400 lbs for PCF and 7,100 lbs for the LS-1
  • Round stock capacity for PCF is 1/2" and LS-1 is 1"
  • Double acting fixtures must be actuated with a 4-way valve
  • Model PCF will prevent a bar from turning at up to 10 ft-lbs of applied torque
  • Model LS-1 will prevent a bar from turning at up to 40 ft-lbs of applied torque


Additional Specs Content

Pressure Rating:  0 to 120 PSI
Temperature Range:  -40° F (-40° C) to 250° F (121° C) standard
                                 Up to 400° F (204° C available)
Port Size:  1/8ʺ NPT
Applied Holding Pressure @ 100 PSI: (PCF: 3400 lbs.) (LS-1: 7100 lbs.)
Lubrication:  Not necessary but will prolong seal life when using dry air
Filtration:  Not essential but a 40 micron filter will prolong seal life