Products

Model 935 Pinch Valve

Acro

Model 935 is base/panel mount ready & accommodates flexible tubing size ranges 0.750” - 1.000” outer diameter (OD), with durometer hardness rating between 50-70* Shore A. It comes with a snap in retention tubing slot for quick loading/exchange procedures, 2 ports for receiving/venting inline supplied operating air pressure, and requires a 3 or 4-way valve for operation.

  • Input air supply/venting ports: 1/8 – 27 NPT
  • Materials: black anodized aluminum or 316L stainless steel
  • Maximum OD tubing size: 1.000” or 25.4 mm
  • N/O or N/C default states 
  • Supply Operating Pressure:  0 to 125 PSI
  • Optional state sensor available

 

Additional Specs Content

Weight: 17.1 oz. (485g)
Operating Pressure Range: 60-125 psig
Tubing Hardness: Up to 50 Durometer Shore A**
Supplied Default State: Normally Closed
Mount Design: Base or Panel
Protective Seals: Panel Mount Seal
Manual Override: None
Tube Loading: Snap-In
Position Sensing: Optional, consult factory
Body Material: Hard Anodized Aluminum
**Depends on tubing material