Isonic® V2000 (M2 Series)

The Isonic® manifolds help simplify set up time and reduce installation costs. The manifolds are prewired to accept a single cable connection. Simply plug in a stand cable to the Sub D connector for quick and clean wiring.  A single connector can supply wiring for up to 8 valves. Manifolds can be mounted on a DIN rail using just two clips.

  • Isonic® V2 manifold comes in 4 or 8 stations
  • Manifolds are high performance thermoplastic
  • Can be assembled on manifold with DIN rail or manifold only
  • Manifold accessories and miscellaneous items offered
  • Common air inlet, 1/4" OD push to connect fitting at both ends
  • Manifolds are impact and chemical resistant


How to Order

Pressure Range:
            A: 28 in-Hg vacuum to 120 PSI (0.025” / 0.65mm orifice)
            B: 28 in-Hg vacuum to 120 PSI (0.035” / 0.90mm orifice)
            C: 28 in-Hg vacuum to 30 PSI (0.055” / 1.4mm orifice)
Temperature Range: 0° F (-18° C) to 120° F (49° C)
Design: 2 or 3-way, direct acting
Lubrication: Not required
Filtration: 40 micron
Tubing: 5/32” or 4mm
Seals: Viton and Nitrile