Isonic® V1000 (M1 Series)


The Isonic® manifolds help simplify set up time and reduce installation costs.  The manifolds have a common air inlet, 1/4" OD collet at both ends of the manifold.  Foot mounting has (4) 11/164" diameter, a maximum pressure of 120 PSI, and can be set up for vacuum service.  There can be anywhere from two to five stations.

  • Isonic® manifold offers stations of 2, 3, 4, 5
  • Manifolds are high performance thermoplastic or aluminum
  • Can be assembled on manifold with DIN rail or manifold only
  • Manifold accessories and miscellaneous items offered
  • Common air inlet, 1/4" OD push-to-connect fitting at both ends
  • Manifolds are impact and chemical resistant


Additional Specs Content

Pressure Range:
            A: 28 in-Hg vacuum to 120 PSI (0.025” / 0.65mm orifice)
            B: 28 in-Hg vacuum to 120 PSI (0.035” / 0.90mm orifice)
            C: 28 in-Hg vacuum to 30 PSI (0.055” / 1.4mm orifice)
Temperature Range: 0° F (-18° C) to 120° F (49° C)
Design: 2 or 3-way, direct acting
Lubrication: Not required
Filtration: 40 micron
Tubing: 5/32” or 4mm
Seals: Viton and Nitrile