Products

Valve Accessories

"20" Series Manifolds
Custom, precision machined manifolds for mounting multiple “20” Series valves.
10mm Manifolds
Multiple-Station Manifolds for use with Pneumadyne’s 10 mm Solenoid Valves.
10mm Single Bases
Single Bases for use with Pneumadyne’s 10 mm Solenoid Valves.
15mm Manifolds
Multiple-Station Manifolds for use with Pneumadyne’s 15 mm Solenoid Valves.
15mm Single Bases
Single Bases are available for use with Pneumadyne’s 15 mm Solenoid Valves.
Air Pilot Operators
Three styles of Air Pilot Operators are available from Pneumadyne.
Air Silencers & Breathers
Mead offers air silencers and breathers to reduce noise and prevent contamination in air systems.
Ball Operators
The Ball Operator features a stainless steel ball for direct contact with the valve button.
Cam Operators
Three styles of Cam Operators are available from Pneumadyne.
DIN Connectors
DIN Connectors are available for use with 15 mm, System 6 & System 8 Solenoid Valves.
Dress Plates
Dress Plates are available from Pneumadyne in two finishes to match a control panel.
Female DIN Solenoid Connectors
Mead offers three industrial B type DIN connectors.
Foot Pedals
Pneumadyne’s Foot Pedal Operator is recommended for use with push button control valves.
Heavy Duty Operators
Pneumadyne’s Heavy Duty Operator is available in two actuation styles.
Isonic® V1000 (M1 Series)
Mead's Isonic® M1 offers manifolds for all valve configurations.
Isonic® V2000 (M2 Series)
Mead's Isonic® M2 offers manifolds for all valve configurations.
Isonic® V4000 (M4 Series)
Mead's Isonic® M4 offers manifolds for all valve configurations.
Manifold PowerStrip™
A simple, cost-effective solution for wiring manifold valve stacks.
MEAD 10-Pin Connector & Ribbon Cable
10-Pin Connector is used with pre-wired manifolds only.
MEAD DIN Rail & Manifold End Stops
DIN rail and manifold end stops are available for Isonic® series valves.
MEAD Manifold Station Blocking Plugs & Port Plugs
Mead offers multiple sizes of port plugs and manifold station blocking plugs.
MEAD Manifolds
Mead offers manifolds to simplify piping.
MEAD Mounting Brackets (for 4-way valve only)
Mead offers mounting brackets as an accessory for Isonic® V4000 Series valves.
MEAD Port Adaptors
Port adaptors provide the option to use 1/4" tubing instead of 5/32".
MEAD Tube Collets
Tube collets are used on valves and manifolds.
MFD Manifold Blanking Plate (for M3V/M4V Valves)
Manifold blanking plate is used to block stations on the manifold not being used by a valve.
MFD Manifold Gasket Kit
Manifold gasket kits are used as a seal between the valve and manifold.
MFD Manifolds (M3V Valves)
Pneumatic valve manifold is used to reduce assembly, installation cost, piping, and installation space.
MFD Manifolds (M4V/M4A Valves)
Pneumatic valve manifold is used to reduce assembly, installation cost, piping, and installation space.
Mounting Brackets
Pneumadyne offers two styles of Mounting Brackets to ease control valve installation.
Oil Tight Operators
Pneumadyne’s offering of Oil Tight Operators provides a selection of buttons, knobs & toggles.
P1Q1 Mini Quick Connect
Provides a secure electrical connection to V1000, V2000, and V4000 series Isonic® valves.
Plug-In Cable
Plug-in Cables are available in three lengths for use with 10 mm & 15 mm Solenoid Valves.
Shrouded Button Operators
Pneumadyne’s Shrouded Button Operators provide a larger tactile surface for actuation.
System 6 Manifolds
Multiple-Station Manifolds are available for use with Pneumadyne’s System 6 Solenoid Valves.
System 6 Single Bases
Single Bases are available for use with Pneumadyne’s System 6 Solenoid Valves.
System 8 Manifolds
Multiple-Station Manifolds are available for use with Pneumadyne’s System 8 Solenoid Valves.
System 8 Single Bases
Pneumadyne offers compact Single Bases for use with System 8 Solenoid Valves.
Thumb Operators
Pneumadyne’s Thumb Operator provides a larger tactile surface for valve actuation.
VDB Controller Board
Designed for interfacing high-performance solenoid actuators to computer systems and digital logic.