Min Series Venturi Vacuum Pump - VP01QRBV

The integral vacuum and blow‑off circuit design provides instantaneous response for high speed assembly and pick & place applications. The blow-off is at line pressure, and is internally plumbed so that only one air and vacuum line is required. This compact, lightweight, dirt tolerant pump can be placed directly at the point of use.

  • Precise – individual connections let you control the vacuum and the blow-off duration
  • Fast response – no delay due to long plumbing lines; installs close to vacuum point
  • Instantaneous vacuum as needed – minimal air consumption
  • High productivity – rapid part release, cycle rates up to 4800/min
  • Easy installation – modular design speeds installation and minimizes assembly
  • Reliable – operates trouble-free, straight-through design, non-clogging

To order the VP01QRBV Series Venturi Pump, click here.

The model number for the VP01QRBV Series Venturi Vacuum Pumps consists of the base model acronym (VP01QRBV-60 or VP01QRBVM8-60) plus five alphanumeric clusters. These clusters designate the flow and vacuum levels, operating pressure, switch or sensor options and silencer. Refer to the chart below for an example of model number VP01QRBV-60H-60-EP-ST2-VSMP-QD-6 . This is a VP01QRBV pump with a maximum vacuum flow of 60, maximum vacuum level of 28"Hg [948mbar], operating pressure of 60 PSI, ST2 silencer and a VSMP vacuum switch with 6" pigtail quick disconnect (the EP denotes the extra port necessary to accommodate the VSMP vacuum switch). The base model part # which includes M8 indicates the integrated valves (2) with an optional M8 connector. Note, part numbers beginning with I- denote a model with G port metric threads.

Ordering Information




VP01QRBV Pump Standard Specifications

Pump Material:Anodized Aluminum (for silencer material see Silencer Page)

Cartridge Material:Nylon, Buna O-Ring
O-rings available in additional materials - Consult factory for availability

Medium:Filtered (50 micron) un-lubricated, non-corrosive dry gases

Operating Temperature:0° to ~122F [-18° to ~501°C]

Operating Pressure:80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures

VP01QRBV 3-Way Valve Specifications

Valve Type: Base Mounted 3-Way, Solenoid Valve, Normally closed

Valve Body Material: Brass, Aluminum, Buna-N

Valve Operating Pressure: Vacuum to 120 PSI [-1 to 8 bar]

Electrical:24 VDC [-15% to +10% Nominal]

Power Consumption:4 watts

Response Time:6 milliseconds

Cycle Rate:80 cycles/second

Average Life:100 million cycles

Electrical Connection:Fixed leads, 24 AWG, 18” [457.2mm], optional M8 3-pin connector

LED Indicator: Yes

Manual Override: Yes, non-locking, spring return

M8 3-Pin Connector: Yes, optional

Performance Level Designations:

M”0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications

H”0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications

VP01QRBV Min Series Operating and Installation Requirements

Supply Line:1/4” O.D. [6mm] tube recommended

Vacuum Line:1/4” O.D. [6mm] tube recommended

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Bimba recommends model VF125LPM (see In-Line Filter Page)

Mounting: Mounting holes accept 4-40 or M3 screws