Products

Mid Series Venturi Vacuum Pump - VP20/VP20BV-MP

Vaccon

VP20-MP pumps have 4 vacuum ports that distribute vacuum equally to 4 locations with “Home-Run” plumbing. The streamlined design minimizes vacuum loss, maximizes vacuum flow and speeds cycle times for safe, efficient lifting operations. A 1.5" diameter glycerin filled vacuum gauge and silencer are standard. Options include an integrated solenoid valve for vacuum control with an optional M8 3-pin connection.

  • High performance – vacuum up to 28"Hg [948mbar]
  • High production – fast cycle times with shot to shot consistency
  • High flow – maintains strong holding force, overcomes leakage
  • Time saving – pre-designed, factory assembled, quick installation
  • Safe operation – no electricity needed at pump
  • Reliable – non-clogging, trouble-free operation

 

To order the VP20-MP Series Venturi Pump, click here.

 

How to Order Content

 

VP20

 

Additional Specs Content

VP20 How to Order

VP20-MP / VP20BV-MP Pump Standard Specifications

Pump Material:Anodized Aluminum (for silencer material see Silencer Page)

Cartridge Material:Nylon, Buna O-Ring,  O-rings available in additional materials - Consult factory for availability

Medium:Filtered (50 micron) un-lubricated, non-corrosive dry gases

Operating Temperature:-30° to ~250°F [-34° to ~121°C]

Operating Pressure:80 PSI [5.5 bar] or 60 PSI [4.1 bar] – Consult Factory for other operating pressures

 
Performance Level Designations:

L”0-10”Hg, [0 to 677mbar] for low vacuum/high flow applications

M”0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications

H”0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications

 
VP20BV-MP Optional 2-Way Valve Specifications

Valve Type:          Axial 2-Way Solenoid Valve, Normally closed

Valve Body Material:Brass, Aluminum, Buna-N

Valve Operating Pressure:Vacuum to 120 PSI [-1 to 8 bar]

Electrical:24 VDC [-15% to +10% Nominal]

Power Consumption:4 watts

Response Time:6 milliseconds

Cycle Rate:80 cycles/second

Average Life:100 million cycles

Electrical Connection:Fixed leads, 24 AWG, 18” [457.2mm], optional M8 3-pin connector

LED Indicator:Yes

Manual Override:Yes, non-locking, spring return

M8 3-pin Connection:Yes, optional

 
VP20-MP / VP20BV-MP Multi-port Mid Series Operating and Installation Requirements

Cartridge Size:C60 (M, H) and C90 (L, M, H)                         C100 (L, M, H) and C150 (L, M, H)

Supply Line:1/4” O.D. [6mm] tube                                           3/8” O.D. [10mm] tube

Vacuum Line:1/4” O.D. [6mm] tube                                         3/8” O.D. [10mm] tube

Vacuum Line Filtration:Typically vacuum filters are not required, if desired Vaccon recommends model VF250LPM (see In-Line Filter Page)

Control Valve:3 way / 2 position (faster part release), minimum orifice – 0.125 I.D. [3 mm]

Mounting Screws:Mounting holes accept 10-32 or [M5] screws