Products

Min Series Venturi Vacuum Pump - VP0X / VP0X-ADJ

Vaccon

The integrated pneumatic high-speed blow-off on the VP0X pump provides a fixed-duration blow-off, based on the volume of the housing. With the VP0X-ADJ adjustable vacuum pump, you can control the intensity of the blow-off using one fingertip adjustment knob. (Customer-supplied directional control valve with exhaust required.) Only one compressed air line provides both vacuum and blow-off, with no electricity required.

  • Fast Response – compact, lightweight and installs close to vacuum point
  • Efficient – minimal air consumption
  • Reliable – operates trouble-free, straight-through design, non-clogging
  • No moving parts to wear or clog
  • No flap valves to stick open
  • Automatically cleans vacuum lines, no maintenance, no downtime

 

To order the VP0X Series Venturi Pump, click here.

How to Order Content

VP0X How to Order

Additional Specs Content

VP0X

 

VP01BV Pump Standard Specifications

Pump Material:Anodized Aluminum (for silencer material see Silencer Page)

Cartridge Material:Nylon, Buna O-Ring
O-rings available in additional materials - Consult factory for availability

Medium:Filtered (50 micron) un-lubricated, non-corrosive dry gases

Operating Temperature:0° to ~122F [-18° to ~65°C]

Operating Pressure80 PSI [5.5 bar] or 60 PSI [4.1 bar]– Consult Factory for other operating pressures

 
VP01BV Optional 3-Way Valve Specifications

Valve Type:Base Mounted 3-Way, Solenoid Valve, Normally closed

Valve Body Material:Brass, Aluminum, Buna-N

Valve Operating Pressure:Vacuum to 120 PSI [-1 to 8 bar]

Electrical:24 VDC [-15% to +10% Nominal]

Power Consumption:4 watts

Response Time:6 milliseconds

Cycle Rate:80 cycles/second

Average Life:100 million cycles

Electrical Connection:Fixed leads, 24 AWG, 18” [457.2mm], optional M8 3-pin connector

LED Indicator:Yes

Manual Override:Yes, non-locking, spring return

M8 3-pin Connection:Yes, optional

 
Performance Level Designations:

M”0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications

H”0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications

 
VP01BV / VP01BV Mid Series Operating and Installation Requirements

Supply Line:1/4” O.D. [6mm] tube recommended

Vacuum Line:1/4” O.D. [6mm] tube preferred

Vacuum Line Filtration:Typically vacuum filters are not required, if desired Vaccon recommends model VF125LPM (see In-Line Filter Page)

Mounting:Mounting holes accept 4-40 or M2 screws