Products

Max Series Venturi Vacuum Pump - VP92

Vaccon

The VP92 Series vacuum pumps are solenoid controlled, designed to interface directly onto a valve stack Sub Base. These high flow vacuum pumps can be used directly in a valve stack to provide vacuum, rather than compressed air in a cylinder port. This eliminates the need for additional vacuum pumps and pneumatic components within an automation system. The VP92 utilizes threaded venturi cartridges, so the cartridge may be interchanged if your application needs change.

  • Direct MAC® 92 Series Sub Base interface
  • High Speed integral 2-way direct acting valves
  • Precise control- individual electrical connections let you control the vacuum and the blow-off duration time
  • Instantaneous vacuum as needed – minimal air consumption
  • Easy installation - modular design speeds installation and minimizes assembly
  • 3 different performance levels: 200M, 200H, 250M

 

To order the VP92 Series Venturi Pump or to download CAD files, click here.

How to Order Content

 

The model number for the VP92 Vacuum Valve Stack Pumps consists of the base model acronym (VP92) plus twoalphanumeric clusters. These clusters designate the flow and vacuum levels, and vacuum switch options. Refer to the chart below for an example of model number VP92-200M-C This is a VP92 pump with a maximum vacuum flow of 200, maximum vacuum level of 20"Hg [677mbar], and optional VTMV-QD-6 vacuum switch. The VP92 comes standard with a ST6AX-2 silencer. 

* The operating pressure of 80 PSI is standard, and the 80 designation does not appear in the part number

How-to-order

Additional Specs Content

VP92

 

VP92 Max Series Pump Standard Specifications

Pump Material:Anodized Aluminum, Buna-N (for silencer material see Silencer Page)

Cartridge Material:Nylon, Buna-N
O-rings available in additional materials - Consult factory for availability

Seat Material:Vinyl

Medium:Filtered (50 micron) un-lubricated, non-corrosive dry gases

Operating Temperature:-23° to ~122°F [-5° to ~50°C]

Operating Pressure:80 PSI [5.5 bar]

 
VP92 Max 2-Way Valve Specifications

Valve Type:  Axial 2-Way Solenoid Valve, Normally closed

Valve Body Material: Brass, Aluminum, Buna-N

Valve Operating Pressure: Vacuum to 120 PSI [-1 to 8 bar]

Electrical:24 VDC [-15% to +10% Nominal]

Power Consumption:4 watts

Response Time:6 milliseconds

Cycle Rate:80 cycles/second

Average Life:100 million cycles

Electrical Connection:Fixed leads, 24 AWG, 18” [457.2mm]

LED Indicator: Yes

 
Performance Level Designations:

M”0-20”Hg, [0 to 677mbar] for medium vacuum/high flow applications

H”0-28”Hg, [0 to 948mbar] for high vacuum/standard flow applications

 
VP92 Max Series Operating and Installation Requirements

Vacuum Line:3/8” O.D. [10mm] tube, 

Vacuum Line Filtration: Typically vacuum filters are not required, if desired Vaccon recommends model V375F (see In-Line Filter Page)

Mounting Screws:2 M5 screws