Spotlights

Dr. Vacuum - Transferring Materials Using Vacuum Pumps [Video]
New Bimba Pricing Configurator [Video]
Move Materials with Bimba's Material Conveying Pump
Hole Punch Air Cylinders [Video]
IntelliAxis® Electric Linear Robot [Video]
Bimba Launches Plug-and-Play Vacuum End-Of-Arm Tooling for Collaborative Robots
2018 Fluid Power Robotics Scholarship Challenge
Why Single Stage Vacuum Pumps Don't Clog [Video]
IMI plc Completes Bimba Manufacturing Company acquisition
Bumpers and Cushions on Pneumatic Actuators [Video]
More
Mini EdgeSwitch Enhances Detection, Simplifies Installation [Video]
Telescoping Electric Actuator Produces 60% More Stroke [Video]
Bimba Adds to Line of Hydraulic Actuators
Mitsubishi Electric Automation and Bimba Manufacturing Collaborate to Provide Electric Motion Solutions
Bimba Announces Presence in Robot Space
Follow Bimba on Social Media!
Subscribe to Bimba's YouTube Channel!
Bimba is hiring!
Pneumadyne manufactures several configurations of Stainless Steel fittings with metric threads.
A Stainless Steel Coupling is available from Pneumadyne with 1/8 Tube Id barbs.
Pneumadyne’s Union Y push-in fittings are available for tube sizes ranging from 5/32 to ½ OD.
Pneumadyne’s Male Y fittings are available for use with tube sizes ranging from 5/32 to ½ OD.
Metal Male Union Y Connectors accommodate 4 to 10mm tubing.
Pneumadyne’s Union Tee push-in fittings accommodate tube sizes ranging from 5/32 to ½ OD.
Pneumadyne’s Union Cross fittings accommodate tube sizes ranging from 5/32 to ½ OD.
Union Branch fittings feature 5 ports and accommodate tube sizes ranging from 5/32 to 3/8 OD.
Female Run Tees quickly connect tube sizes ranging from 5/32 to ½ OD.
Pneumadyne’s Reducing Tee fittings accommodate tube sizes ranging from 1/4 to ½ OD.
Pneumadyne’s Union Tee push-in fittings accommodate 3 tube sizes.
Metal Male Swivel Tee Connectors accommodate 1/8 to 1/2 OD tubing.
Pneumadyne’s Male Branch Tee push-in fittings accommodate 5/32 to ½ OD tubing.
Pneumadyne’s Male Run Tees accommodate tube sizes ranging from 5/32 to ½ OD.
Metal Female Swivel Elbow Connectors accommodate 1/8 to 1/2 OD tubing.
Metal Male Extended Swivel Elbow Connectors accommodate 5/32 to 3/8 OD tubing
Metal Male Swivel Tee Connectors accommodate 1/8 to 1/2 OD tubing.
Metal Male Swivel Y Connectors accommodate 1/4 OD tubing.
Metal Male Swivel Elbow Connectors accommodate 1/8 to 1/2 OD tubing.
Metal Male Union Tee Connectors accommodate 1/8 to 1/2 OD tubing.
Swivel and fixed elbow fittings are available from Pneumadyne for use with 5/32 to ½ OD tube.
Pneumadyne’s extended male elbow fittings accommodate 5/32 to ½ OD tubing.
Tube to Stem Elbow Reducers accommodate tube sizes ranging from ¼ to ½ OD.
Pneumadyne’s Tube to Stem Elbow fittings are ideal for creating bends in a pneumatic system.
Pneumadyne’s Female Bulkhead fittings are available for tube sizes ranging from 5/32 to 3/8” OD.
Union elbow fittings are available from Pneumadyne for use with 5/32 to ½ OD tube.
Pneumadyne’s Stem Reducers accommodate push-in port sizes ranging from ¼ to ½ OD.
Pneumadyne’s Female Bulkhead fittings are available for 5/32, ¼ and 3/8” OD tube.
Pneumadyne’s Female Connectors accommodate 5 tube sizes and 4 thread sizes.
Plugs are available from Pneumadyne for use with 5/32, 1/4 & 3/8 OD push-in ports.
Metal Male Plugs are available for use with 1/8", 1/4" & 3/8" OD push-in ports.
Pneumadyne’s Composite Union Reducers accommodate 1/4 to 1/2 OD tubing.
Pneumadyne’s push-in Bulkhead Unions are available for tube sizes ranging from 1/8 to ½ OD.
Metal Male Union Connectors accommodate 1/8 to 1/2 OD tubing.
Metal Male Connectors accommodate 3/32 and 1/4 OD tubing.
Metal Male Connectors accommodate 1/8 to 3/8 OD tubing.
Metal Female Bulkhead Connectors accommodate 1/4 and 3/8 OD tubing.
Metal Male Union Connectors accommodate 4 to 14mm OD tubing.
Metal Male Connectors accommodate 4 to 14mm OD tubing.
Metal Female Connectors accommodate 4 to 12mm OD tubing.
Metal Male Connectors accommodate 4 to 12mm OD tubing.
Metal Male Connectors accommodate 6 and 8mm tubing.
Metal Male Expander/Reducer Connectors accommodate 4 to 14mm OD tubing.
Metal Male Union Bulkhead Connectors accommodate 4 to 12mm OD tubing.
Metal Male Union Elbow Connectors accommodate 4 to 14mm tubing.
Metal Male Elbow Connectors accommodate 4 to 12mm tubing.
oMetal Male Elbow Connectors accommodate 6 and 8mm tubing.
Metal Male Elbow Connectors accommodate 4 to 14mm tubing.
Metal Male Elbow Connectors accommodate 4 to 14mm tubing.
Metal Male Union Tee Connectors accommodate 4 to 14mm tubing.
Metal Male Tee Connectors accommodate 6 to 10mm tubing.
Metal Male Tee Connectors accommodate 4 to 12mm tubing.
Metal Male Tee Connectors accommodate 4 to 12mm tubing.
Metal Male Tee Connectors accommodate 6 and 8mm tubing.
Metal Male Union Y Connectors accommodate 4 to 10mm tubing.
Metal Male Union Connectors accommodate inch to mm tubing.
Metal Male Connectors accommodate mm tube to NPTF thread.
Metal Male Connectors accommodate mm tube to NPTF thread.
Metal Male Connectors accommodate inch tube to ISO R thread.
Metal Male Connectors accommodate inch to mm tubing
Metal Male Connectors accommodate inch tube to ISO G thread.
Metal Female Bulkhead Connectors accommodate 1/8 to 3/8 OD tubing.
Pneumadyne’s Composite Union Connectors accommodate 5/32 to ½ OD tubing.
Pneumadyne’s Round Male Connector push-in fittings accommodate 4 tube sizes.
Pneumadyne’s Male Connector push-in fittings accommodate 6 tube sizes.
Metal Male Connectors accommodate 1/8 to 1/2 OD tubing.
Pneumadyne’s Adjustable Tee fitting is available with 10-32 UNF and10-32 (F) threads.
Pneumadyne’s Threaded Cross fittings are available in both adjustable and fixed styles.
Pneumadyne’s Threaded Coupling fittings feature 10-32 (F) threads.
Pneumadyne’s adapter fitting features 1/8 NPT and 1/4 NPT (F) threads.
Pneumadyne’s adapter fitting features 1/16 NPT and 1/8 NPT (F) threads.
Two styles of Adapters with 10-32 (M) threads are available from Pneumadyne.
Pneumadyne’s Fixed Elbows are available with 9 thread sizes and 9 barb sizes.
IntelliSense® patch software required to update IntelliSense Data Gateway Ver.1.0.0 via USB drive.
IntelliSense® Sensor Interface monitoring and configuration software for Windows.
IQ® Stepper proprietary motion control configuration tool used to configure Bimba Stepper drives.
Proprietary motion control programming environment for Stepper and Servo drive and controllers.
Parallel grippers allow for the holding of an object which will be manipulated.
Parallel grippers allow for the holding of an object which will be manipulated.
Angular grippers provide an economical solution for most simple material transfer applications.
Mead offers manifolds to simplify piping.
Pneumadyne’s 10-32 (F) Brass Manifold has 6 output ports for fluid distribution.
Pneumadyne Quick Disconnects are one of the smallest, automatic valved couplings available
Three body styles of Static Bulkhead Connectors are available from Pneumadyne.
Pneumadyne’s 3/8 OD x 1/4 ID Polyurethane Tubing is offered in three colors.
Pneumadyne’s 3/8 OD x .245 ID Polyurethane Tubing is available in 14 colors & 2 durometers.
Pneumadyne’s 15/32 OD x 5/16 ID Polyurethane Tubing is available in seven colors.
Pneumadyne’s 9/16 OD x 3/8 ID Polyurethane Tubing is available in eight colors.
1/8 OD x 1/16 ID Multi-Bore Polyurethane Tubing is available from Pneumadyne.
Pneumadyne offers 1/4 OD x 1/8 ID Multi-Bore Polyurethane Tubing.
1/8 OD x 1/16 ID single or twin Polyurethane Coils are available from Pneumadyne.
1/4 OD x 1/8 ID single or twin Polyurethane Coils are available from Pneumadyne.
1/8 OD x 1/16 ID Multi-Color Ribbon Tubing is available from Pneumadyne.
1/8 OD x 1/16 ID Multi-Color Ribbon Tubing is available from Pneumadyne.
Pneumadyne’s Ribbon Tube Connector easily connects & disconnects sections of a system.
5/16 OD x 3/16 ID Polyurethane Tubing is available from Pneumadyne in three colors.
Pneumadyne’s 1/4 OD x .170 ID Polyurethane Tubing is available in six colors.
Three durometers and 13 colors of 1/4 OD x 1/8 ID Polyurethane Tubing is offered by Pneumadyne.
Tubing cutter quickly and safely cuts plastic tubing, from Pneumadyne.
Pneumadyne’s 5/32 OD x 3/32 ID Polyurethane Tubing is available in seven colors.
Pneumadyne’s 1/8 OD x 1/16 ID Polyurethane Tubing is available in a variety of colors.
Designed for mobile equipment operations to avoid stall conditions.
Mead offers a single acting, spring return, versatile light duty air press.
Adjustable column style air press provides infinitely variable daylight settings, permits radial swing.
This booster offers significantly higher flow rates at the same air pressure than basic booster design.
AT series air/oil tanks provide smooth, cost-effective operation typically associated with hydraulics.
Pneumadyne offers Air Jet Kits for either 1/16 or 1/32 orifice nozzles.
CSV series controls provide safer operation of air presses, drill fixtures, clamping fixtures, and more.
DPS series digital pressure switches offer programmable digital and analog pressure outputs.
Pneumadyne offers Micro Pressure Gauges in three pressure ranges.
Digital gauges increase precision and legibility on regulators and filter-regulators.
MFD offers filter, regulator, lubricator modular connecting kits for each series of products.
MGV series soft start valves are available with MFD pressure regulators.
Highly accurate air pressure control in a compact package; ideal for limited space applications.
Used to maintain a preset downstream pressure, available in relieving/non-relieving.
Coalescing filters protect sensitive pneumatic equipment by removing oil mist and contamination down to 0.01μ.
Mead offers a variety of reed and solid state switches which work with our extruded thrusters.
Mead offers a variety of reed and solid state switches which work with our extruded thrusters.
CS-7500 series solid state and reed switches are available for use with Mead DM2 series cylinders.
Available as sourcing/sinking with operating voltage range of 4.5-30VDC, and 2 mounts types.
Available as sourcing, sinking, or reed, and can be used with Mead DM1 and HD1 tie-rod cylinders.
Available in sinking, sourcing, or reed model type and compatible with Mead Centaur cylinders.
This mounting band is available for use with High Illumination band mounted switches.
These switches feature a larger LED lit area that can be seen further away than other switches.
MRS switches feature a heavy duty band mount in a variety of models and operating voltages.
Recommended for low current DC loads and can be used on cylinders with up to a 3" bore.
This is a service part for the IntelliSense® Data Gateway.
Female DB9 to RJ45 CAT5 Serial Cable to connect IntelliSense® SIM to RS422 to USB Serial Hub.
IntelliSense® USB programming cable required for the initial setup of an IntelliSense® SIM.
0.5M for wire cable Molex 4-Pin Header to flying lead.
Female 4 pin Micro M8 Straight connector to 4 pin Female Micro M8 90° connector shielded cable.
4 Port Serial RS422 to USB Hub with Din Rail Bracket.
Has four RJ45 connectors and one 8 pin terminal block in parallel to simplify IntelliSense® wiring.
Enhances your IntelliSense® network with remote monitoring and data logging capabilities.
24V Class 2 Power supply for use with IntelliSense® Sensor Interface Module.
IntelliSense® Fittings are an easy way to connect an IntelliSense® Sensor to a pneumatic actuator.
Compact pressure and temperature sensor for using with and IntelliSense® Sensor Interface Module.
FCPM Flow Controls offer metered flow in one direction, free flow in the opposite direction.
Designed for interfacing high-performance solenoid actuators to computer systems and digital logic.
Provides a secure electrical connection to V1000, V2000, and V4000 series Isonic® valves.
Plug-in Cables are available in three lengths for use with 10 mm & 15 mm Solenoid Valves.
DIN Connectors are available for use with 15 mm, System 6 & System 8 Solenoid Valves.
The Ball Operator features a stainless steel ball for direct contact with the valve button.
Custom, precision machined manifolds for mounting multiple “20” Series valves.
Mead offers three industrial B type DIN connectors.
Mead's Isonic® M4 offers manifolds for all valve configurations.
Mead's Isonic® M4 offers manifolds for all valve configurations.
Mead's Isonic® M2 offers manifolds for all valve configurations.
Mead's Isonic® M2 offers manifolds for all valve configurations.
Mead's Isonic® M1 offers manifolds for all valve configurations.
Mead's Isonic® M1 offers manifolds for all valve configurations.
Manifold gasket kits are used as a seal between the valve and manifold.
Manifold blanking plate is used to block stations on the manifold not being used by a valve.
Manifold blanking plate is used to block stations on the manifold not being used by a valve.
Pneumatic valve manifold is used to reduce assembly, installation cost, piping, and installation space.
Pneumatic valve manifold is used to reduce assembly, installation cost, piping, and installation space.
Mead offers air silencers and breathers to reduce noise and prevent contamination in air systems.
Mead's Isonic® series offer valves in 2 and 3-way configurations.
Mead's Isonic® series offer valves in 2 and 3-way configurations.
Mead's Isonic® series offer valves in 2 and 3-way configurations.
Mead's Isonic® series offer valves in 2 and 3-way configurations.
Mead's Isonic® series offer valves in 2 and 3-way configurations.
Tube collets are used on valves and manifolds.
Mead offers multiple sizes of port plugs and manifold station blocking plugs.
10-Pin Connector is used with pre-wired manifolds only.
DIN rail and manifold end stops are available for Isonic® series valves.
Port adaptors provide the option to use 1/4" tubing instead of 5/32".
Mead offers mounting brackets as an accessory for Isonic® V4000 Series valves.
Mead offers mounting brackets as an accessory for Isonic® V4000 Series valves.
Mead offers manifolds to simplify piping.
“11” Series Shuttle Valves have 1/8 NPT and push-in ports for higher flow.
Shuttle Valves are available with barbed or 10-32 threaded ports.
Mead offers shuttle valves to actuate cylinders and valves.
The “11” Series Quick Exhausts feature 1/8 NPT, ¼ NPT and push-in cylinder ports.
The In-Line Quick Exhaust Valve has an 1/8 NPT cylinder port & relieves 100 in3 of air in 1 second.
The “10” Series Quick Exhausts feature 10-32 threads & relieve 100 in3 of air in 6 seconds.
Mead's quick exhaust valves will increase your cylinder speed.
The Mini Needle Valves feature 10-32 UNF & 1/8 NPT input ports & a 10-32 (F) output port.
The “11” Series Needle Valves feature 1/8 NPT (F) & ¼ or 5/32 push-in porting options.
The “700” Series Needle Valves feature 10-32 UNF & 1/8 NPT input ports & a 10-32 (F) output port.
The “0” Series Needle Valves feature 9 input options & a 10-32 (F) output port.
Check Valves are available with barbed, threaded or push-in ports.
Mead offers in line check valves that can be used in your pneumatic application.
Mead offers bleed pilot valves as a simple and economical alternative to electronic valve actuation
Bleed Valves are available with 10-32 UNF, 1/8 NPT & ¼ NPT threads.
Pneumadyne’s compact AND Valve features 10-32 (F) input and output ports.
Air to electric switches convert air signals into electrical signals.
These can only be locked in the closed position, rendering downstream equipment inoperable.
These can only be locked in the closed position, rendering any downstream equipment inoperable.
Mead's CSV series controls provide safer operation of air presses, drill fixtures, clamping fixtures, etc.
The Double Flow Control Valve is ideal for controlling actuator extension & retraction speeds.
The Mini Flow Control from Pneumadyne features a 1/8 NPT input and 10-32 (F) output.
Banjo Flow Control Valves feature 10-32 UNF input and output ports.
FQPS flow control feature composite bodies with integral one touch quick disconnect fittings.
Quik-Flo® controls meter flow in and out, versus meter out for the other flow controls.
FCP series flow controls offer zinc die cast bodies with female threaded connections for hard piping.
Acro’s New solenoid pinch valve product line fitted for a broad variety of market applications.
Acro’s New solenoid pinch valve product line fitted for a broad variety of market applications.
Acro’s New solenoid pinch valve product line fitted for a broad variety of market applications.
Pneumadyne’s 3-Way Latching Solenoid Valves are available with 12V DC or 24V DC coils.
Pneumadyne’s 10 mm Latching Solenoid Valves is available with a 24V DC coil.
Pneumadyne’s 3-Way Latching Solenoid Valves are available with 12V DC or 24V DC coils.
Pneumadyne’s Latching Solenoid Valves feature 15 mm 12V DC & 24V DC coils.
Pneumadyne’s Latching Solenoid Valves feature 15 mm 12V DC & 24V DC coils.
Pneumadyne’s “20” Series Solenoid Operated Valves feature single or double 110V AC coils.
Pneumadyne’s “20” Series Solenoid Operated Valves feature single or double 24V DC coils.
High quality, high reliability, NAMUR direct mount, internally piloted, solenoid valves.
High quality, high reliability, NAMUR direct mount, internally piloted, solenoid valves.
Mead offers a variety of directional control actuation styles.
Mead offers a variety of directional control actuation styles.
Mead offers a variety of directional control actuation styles.
Mead offers a variety of directional control actuation styles.
Capsula valves work long and hard even when subjected to dirty air.
Capsula valves work long and hard even when subjected to dirty air.
Capsula valves work long and hard even when subjected to dirty air.
Light-Touch, snap acting control valves are compact with extremely low actuation forces.
Light-Touch, snap acting control valves are compact with extremely low actuation forces.
Light-Touch, snap acting control valves are compact with extremely low actuation forces.
Mead's Isonic® offers valves in 4 way, 2-position configurations.
Mead's Isonic® offers valves in 4 way, 2-position configurations.
Mead's Isonic® offers valves in 4 way, 2-position configurations.
Pneumadyne’s 4-Way “20” Series feature single or double 12V DC Solenoid Valves.
Pneumadyne's “20” Series Solenoid Operated Valves are offered with 110V AC coils.
Pneumadyne's “20” Series Solenoid Operated Valves are offered with 24V DC coils.
Mead’s 3-way high quality, high reliability solenoid valves
Pneumadyne’s “20” Series Solenoid Operated Valves are available with 12V DC coils.
System 8 Solenoid Valves from Pneumadyne are available with 220V AC coils.
System 8 Solenoid Valves from Pneumadyne are available with 220V AC coils.
24V AC coils are available on Pneumadyne’s System 6 Solenoid Valves.
High quality, high reliability direct acting valves.
24V DC coils are available on Pneumadyne’s System 8 Solenoid Valves.
24V DC coils are available on Pneumadyne’s System 6 Solenoid Valves.
24V DC coils are available on Pneumadyne’s 15 mm Solenoid Valves.
24V DC coils are available on Pneumadyne’s 10 mm Solenoid Valves.
12V DC coils are available on Pneumadyne’s System 8 Solenoid Valves.
Pneumadyne’s 3-way System 6 Solenoid Valves are available with 12V DC coils.
Pneumadyne’s 3-way 15 mm Solenoid Valves are available with 12V DC coils.
Pneumadyne’s 3-way 10 mm Solenoid Valves are available with 12V DC coils.
Pneumady