Products

"0" Series

Needle Valves are used to reduce the rate of flow in a leg of a pneumatic circuit, consequently slowing actuator speed.  A finely threaded stem allows the gradual adjustment of the amount of controlled flow passing through the valve.  Pneumadyne’s “0” Series Needle Valves feature a variety of input options to fit porting requirements.

•    Input Port Options:  10-32 (F), 1/8 NPT, 1/8 NPT (F), .170 tube id barb, ¼ or 5/32 Push-in
•    Output Port:  10-32 (F)
•    Swivel input port accommodates valve alignment
•    Flow Rate:  9.4 scfm at 125 psi
•    Operating Pressure:  0 to 125 psi
•    Metered flow in both directions

  • Fluid Management
  • TRD Manufacturing
Feedback Form
Leads to Insight